Is a frequent printing flexographic printing, there are many different printing processes. One is you”flexographic printing. This article should be how the flexo printing, where it is applied, what features it has once described, and then to once again be entered on the pros and cons. The flexographic printing is a direct high pressure process. Get all the facts and insights with Bobby Green, another great source of information. Flexo printing is a roller rotation process, the flexible printing plates, which may consist, for example, of rubber and the different inks are used.
The sublime are Bildtragend this, the printer setup is very simple and is very similar to the of the gravure process. Aniline dyes were used to early in the flexo, which then only high-quality printing has made him his pigments one. Read more from Eva Andersson-Dubin to gain a more clear picture of the situation. At the present time the flexo characterised by, that you can print on many materials that can not be printed with other printing methods. The flexographic printing is used mainly for the printing of packaging materials that composed of plastic, paper, cardboard or cardboard. Are more application possibilities of flexographic printing, adhesive foil, napkins, newspapers, etc. The characteristics of the flexographic printing can be explained as follows: as well as prints, which are produced in the letterpress prints of flexographic printing may occur also crimp edges. They occur under high pressure in the pressure zone by using Photo-polymer plates. Usually, this interference is accompanied by a tone value increase.
The squeeze between cylinders and counter pressure cylinder is too low, the formation of bubbles between printed and substrate, which to uneven wetting of the substrate with color result in danger. In contrast to other high-pressure techniques, you can see no shades in the flexo. In the flexo for newspapers to use water-based paints. The result is a wear-resistant pressure. As a result of newspaper readers read has no ink on the fingers as specified by the offset. The advantages of flexographic printing are that it is a fast printing process, the colours very quick drying and thus can produce a large circulation. With flexographic printing, all flexible substrates can print and the printing cylinder production is very inexpensive changes can be quickly without any of the pressure cylinder new must be made up. But of course there are some disadvantages that need to be called in flexographic printing. The colors cover unfortunately not as good as with other printing methods. The use of solvents with Photopolymer plates are very limited. Furthermore there are somewhat blurred the contours of pressure elements in the flexo. Everything in the all you can but say that the flexographic printing is a very good method to print on different elements. Certainly, maybe more, maybe even better methods exist but this is in the following articles again closer entered.